A common question for garage door retailers is, what size must the garage door be to allow for rough opening smoothly? In most instances the simple answer is that you need to make the door slightly smaller or the same size as the main door and this is usually the standard answer that you will normally receive. However, the garage is used for a lot of other purposes other than for just opening and closing doors.

door rough opening chart

It might be a good idea to take a look at this information for some added security. The first thing that needs to be considered when discussing garage door rough opening is whether or not it is actually required to have a larger door than what comes on the basic “stock” models.

In the past, many people have argued that it was a necessity for a garage door to be slightly larger because it was intended to keep people from being able to enter the house through an opening in the roof. For years, these doors were almost always meant to be slightly larger in order to prevent that sort of entry.

garage door framing

However, times have changed and now the standard definition of a standard garage entry door is one that is made up of a rectangular section with two flat panels on each side of this section. There is no longer a need to force homeowners into the fact that their doors must be slightly larger than the ones that come on the market today.

In addition to the standard definition for a garage door rough opening, there are actually several other types that need to be defined as well. For example, there are doors that will open inward instead of outward. If you are going to be installing an inward-style door, you may want to consider whether or not you would want a “keyed” opener.

rough opening for doors

Some people may prefer to make sure that these keyed openings do not have any sort of “knob” that can be accidentally turned which could cause a person to be forced back out of their car. You also have the option of choosing a slightly smaller door than what is listed above.

This will still keep people from being able to easily access their car, but it will also allow them to open it without having to turn their shoulder toward the doorway in order to do so. A slightly smaller door will still have the two flat panels of glass on either side, but you will only have a single panel. However, you will have the benefit of having a lock installed on the door.

standard rough door opening own

When shopping for a new door, always consider the overall security level that you desire. Sometimes it is more important to go with a lock that locks all the way than it is to simply go with a door that will seal tightly. There are also several different exterior door sizes rough openings that are available. These doors are generally referred to as “swing up” doors since they do in fact swing up when opened.

You will find that there are several companies who specialize in these exterior door sizes rough openings. However, you should take some time and consider your options before choosing the one that is right for you. There are three types of exterior door rough openings that are available, namely, roller, tilt up, and sectional roll up doors.

garage door framing diagram

All of these doors will provide a degree of safety, especially if you live on a main street that has a high rate of vehicular traffic. When shopping for a new door, you should consider the fact that each one of these models will provide a slightly different height.

When shopping for a door, it can sometimes be tempting to choose the one that has the smallest overall size. However, you should take into consideration the fact that if you are unable to install the roll up door on your own, it will require a significant amount of drilling. In addition, you may need to employ a contractor to help you install the kit door.

exterior door rough opening

Even if you do use a professional to install this type of item, it is still recommended that you provide the necessary training for them to accomplish the job. Even though most people think that the overall size of the exterior door is not as important, it is very important to leave enough space for a person to open and close the mechanism.

If you are unable to find the proper size roll up garage door installation, you can still purchase a door that has a rough opening that is close to the actual finished opening. The benefit of doing this is that you can still open and close the door without having to drill the actual framing. Although this option can save you some money, you should only use it if you are confident of your ability to complete the task.

If you cannot complete the rough opening installation by yourself, you can still use a professional to help you. There are plenty of professionals that specialize in completing this type of project.